Product info
Pyxis is an analogue amplifer for load cells, microprocessor controlled, compact and easy to use.
It is installed on flexographic, rotogravure, cutting, etc. machines to detect the tension of the laminates. Its HW/SW conguration cuts signal processing times and allows up to four load cells to be connected.
Pyxis has just 3 push-buttons for calibration and programming, and a 3-digit display which at all times shows the function selected or the tensioning value.
Both load cell inputs and outputs for connection to your PLC or actuator system can be selected in voltage (mV) or current (mA).
Technical data
| Power supply | 24 Vdc (18÷30 Vdc max) |
| Consumption | 250 mA max |
| Working temperature | 0÷50° C |
| Inputs | 0÷60 mV / 4÷40 mA
for load cells |
| Analog output | 0÷10 V or 4÷20 mA
selectable |
| Analog outputs | 2 for 0÷10 V
with adjustable digital filter for remote display or amplified input |
| Relay digital outputs | 2 for 24 Vdc/Vac
for alarms |
| Outputs | 24 Vdc
for remote display supply |
Download
| Datasheet | Drawing PDF | Drawing Dwg | 3D | User manual |
| Pyxis |  | | | | |