Product info
The ReTens system allows to control the tension of the material at the exit of the bridge of the corrugated board machine before the joining phase of layers.ReTens keep the tension constant and precise avoiding wastes and downtimes during the machining process.
The system is made up of:
- an EP 25 electro-pneumatic panel, where a standard T-One is installed and by which the operator can smoothly set and control the ideal web tension
- a CF flange or CK shaft through load cells, to check the web tension
- a Combiflex or Extreme pneumatic brake
Technical data
| Power supply and absorption | 24 Vdc - 8 W max |
| Analog input 0÷20 mV / 4÷20 mA | 1 in for max nr.2 load cells |
| Analog input 0÷10 V | 1 in for remote setpoint remoto or line speed |
| Digital input 24 V | 2 in for remote controls |
| Analog output 0÷10 V / 4÷20 mA | 1 out for PID torque control |
| Analog output 0÷10 V | 1 out for tension proportional |
Digital relay outputs 24 Vdc / 24 Vac
| 2 out for alarms |
| Working temperature | 10°÷50°C |
| IP protection class | IP 20 |
| Min air pressure | 7,5 bar |
Download
| Datasheet | Drawing PDF | Drawing Dwg | 3D | User manual |
| Retens system |  | | | | |