Product info
To increase the productivity and the quality of the product, the ReCorr web guide system, installed on the exit of the web bridge of corrugated board machinery, can to control the positioning of the material avoiding the collision with the lateral guides.
The system is made up of:
- a motorised guide group with a stepping motor
- two FISH-EYE wide angle reading sensors
- a box containing the MWG.10 tension controller to set the initial set up and to control parameters during operation.
ReCorr can be supplied both for single wave control and in a MASTER and SLAVE configuration, able to ensure a precise alignment of the waves with the sleeve.
Technical data
| Power supply and absorption | 24 Vdc - 6 A (slave), 3 A (master) |
| Web min-max difference | 1400 mm (on request higher values available) |
| Guiding mode | Slave,
Slave + master |
| Max LED lamp length | 1000 mm |
| FishEye max height | 800 mm |
| Minimum sensor resolution | 0,4 mm |
| Response time | 5 msec |
| Communication | CAN bus (proprietary protocol) |
| Wheels unit max rotation angle | ±6° |
| Working temperature | 10°÷50° C |
| IP protection class | IP20 |
| Air min pressure | 6,5 bar |
Download
| Datasheet | Drawing PDF | Drawing Dwg | 3D | User manual |
| Recorr webguide for corrugator |  | | | | |