Product info
T-two is a digital tension controller for the automatic regulation of the web tension; provided with a compact and sturdy case, it has been designed to be mounted on a DIN bar inside the electrical panel of the machine. The core of T-two is the new P.I.D. algorithm specifically developed by our technicians to stabilize critical systems.
The control panel of T-two tension controller is equipped with 3 buttons for the regulation and the management of the parameters and a 3 digit display with 7 red segments.
T-two standard is able to regulate the web tension using the brake torque that refers to the signal coming from load cells or dancing roller.
T-two LB is the version studied for SPLICER systems: the non-working reel is held down by the stand-by torque, while the working reel is regulated in torque by the P.I.D. algorithm to keep the dancing roller in the preset setpoint position.
Technical data
| T-two | T-two LB |
|---|
| Power supply | 24 Vdc (+/- 10%) | 24 Vdc (+/- 10%) |
| Power | 6 W max (logic)
+ 58 W max (power)
| 6 W max (logic)
+ 58 W max (power) |
| Analog input 0÷13 mV | 1 max n. 2 load cells | - |
| Analog input 0÷10 V / 4÷20 mA | 1 max n. 1 amplified cell or dancing roller
| - |
Analog input 0÷10 V
| 1 remote set point
1 dancing roller piston control | 1 dancing roller |
Digital input 24 V
| 4 remote controls from PLC
| 2 remot controls from PLC
|
| Output 10 Vdc | 1 potentiometers supply | - |
| Output 24 Vdc | 1 amplified cells or remote display supply | - |
| Analog output (0÷10 Vdc, 4÷20 mA, ecc.) | 1 tension proportional or dancing roller piston control
1 PID torque control
| - |
| PWM output 0÷1 A | 1 electromagnetic brake | 2 electromagnetic brakes |
| Digital relay outputs 30 Vdc/Vac | 2 for alarms | - |
| Weight | 170 g
| 170 g |
Working temperature
| 0÷50 °C | 0÷50 °C |
| IP protection class | IP20 | IP20 |
Download
| Datasheet | Drawing PDF | Drawing Dwg | 3D | User manual |
| T-TWO |  | | | | |
| T-TWO LB | | | | | |